Western-digital My Net N750 User Manual Manuel d'utilisateur télécharger pdf (Page 47)

ADVANCED SETTINGS

MY NET ROUTERS

USER MANUAL

Firewall Screen

Create Firewall Rules

Name Name to identify the firewall rule.

Source Local network (LAN) or Internet (WAN).

Source IP Range Range of IP addresses where the traffic initiates.

Protocol Protocol that will be applied in the firewall rule. Available

options are All, TCP, UDP, and ICMP.

Action From the drop-down list, select whether to allow or deny

incoming and outgoing traffic.

Destination Local network (LAN) or Internet (WAN).

Destination IP Range Range of IP addresses where the traffic is destined.

Port Range Network traffic port range that will be applied in the firewall

rule.

DMZ Screen

DMZ Host

Enable DMZ Toggle the button to On to enable DMZ.

DMZ IP Address If DMZ is enabled, select a computer from the list and click

the double arrows to populate the IP address, or manually

enter the computer’s IP address.

MAC Filter Screen

MAC Filtering Rules

MAC Filtering drop-down

list

The default setting is Turn MAC Filtering OFF. Other options

are:

• Turn MAC Filtering ON and DENY computers listed to

access the network.

• Turn MAC Filtering ON and ALLOW computers listed to

access the network.

Active Status of the MAC filtering entry.

MAC Address Unique identifier of your local network device being filtered.

Double arrows After selecting a computer from the DHCP Client List, click

the double arrows to populate the MAC Address box.

DHCP Client List Computers and devices that are currently connected to your

router.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 92 93

Pas de commentaire

Western-digital My Net N750 User Manual Manuel d'utilisateur Page 47