Western-digital My Net AC Bridge User Manual Manuel d'utilisateur télécharger pdf (Page 23)

ADVANCED SETTINGS

MY NET AC WI-FI BRIDGE

USER MANUAL

2. To change from Dynamic IP (DHCP), the default setting, to Static IP, select Static IP

from the LAN Connection Type drop-down list. The screen displays additional

settings.

3. Review and complete the settings:

4. Click Save.

Setting Description

LAN IP address IP address of the bridge. The IP address should

be on the same network as your existing router.

Subnet Mask The subnet mask is used to control how many

subnetworks can exist in your local network.

Default Gateway IP address of the router to which this device is

connected wirelessly.

Primary/Secondary DNS Server Your ISP configures and maintains the primary

and secondary DNS Server addresses. You can

find them on your main router or by contacting

your ISP.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Pas de commentaire

Western-digital My Net AC Bridge User Manual Manuel d'utilisateur Page 23